Steam Shower Installation in Campbell
Silicon Valley Kitchen & Bath Co. designs and builds steam showers in Campbell, where our office is. designs and builds steam showers from our office in Campbell, serving the South Bay and the wider Bay Area. A steam shower is a sealed, vapor-proof room, so we handle the whole assembly under one contract: generator sizing, the dedicated electrical circuit, steam-rated waterproofing on the walls and ceiling, the sloped ceiling, tile, and gasketed glass, with a documented flood test before any tile is set.
CSLB License #975092 · Licensed since 2012 · 2272 Camden Avenue, Campbell
Steam showers in Campbell homes
Campbell is our home city, and most of the steam showers we design here go into 1950s and 1960s ranch houses and the bungalows near downtown. Primary bathrooms in these homes are compact, which works in favor of steam: a smaller enclosure heats quickly and needs a modest generator. The usual work is reorganizing the existing footprint so the shower can be fully enclosed, then finding a dry, reachable spot for the generator, most often a vanity cabinet or an adjacent closet.
Permits and systems
Many Campbell ranches still carry their original 100-amp electrical panel. A steam generator needs its own 240-volt circuit, so we check panel capacity on the first visit; where the panel is full, a subpanel or an upgrade becomes part of the scope. Raised floors over a crawlspace are common here, which makes drain and supply changes straightforward.
Permits for this work go through the City of Campbell Building Division. When a permit is part of your project, we handle the application and the inspections.
What's included
- —Steam generator sizing & placement
- —Dedicated 240V circuit & controls
- —Steam-rated vapor barrier on walls, ceiling & bench
- —Sloped, fully tiled ceiling
- —Porcelain, Dekton or Neolith surfaces
- —Floor-to-ceiling gasketed glass with transom
- —Built-in bench, niches & lighting
- —Documented 24-hour flood test before tile
How we build them, step by step, is on the steam shower installation page.
Questions from Campbell homeowners
- Do you build steam showers in Campbell?
- Yes. Silicon Valley Kitchen & Bath Co. builds steam showers in Campbell, including Downtown Campbell, San Tomas, Dry Creek, as part of our design-build bathroom remodeling. Our office is at 2272 Camden Avenue in Campbell. CSLB License #975092, licensed since 2012.
- Do I need a permit for steam showers in Campbell?
- Normally yes. Steam showers involve electrical and plumbing work, which the City of Campbell Building Division permits and inspects. When a permit is part of your project, we prepare the application and manage the inspections.
- What is different about Campbell homes?
- Many Campbell ranches still carry their original 100-amp electrical panel. A steam generator needs its own 240-volt circuit, so we check panel capacity on the first visit; where the panel is full, a subpanel or an upgrade becomes part of the scope. Raised floors over a crawlspace are common here, which makes drain and supply changes straightforward.
- Can you convert my existing shower into a steam shower?
- Usually, but it means rebuilding the shower. A steam shower needs a vapor barrier behind the tile on the walls and ceiling, a sloped ceiling, a sealed door and a dedicated electrical circuit, and none of those can be added on top of finished tile.
- Does a steam shower need a permit?
- Normally yes. A steam shower adds new electrical and plumbing work, which requires a building permit in Bay Area cities. When a permit is part of your project, we prepare the application and manage the inspections with your city building department.
Neighborhoods
Also in Campbell: bathroom remodeling and the Campbell area page.
Ready to build something that lasts?
One team handles design, permits, and build — from concept to finished space.